Calibration Properties

CalSource: str Name of the calibration source

Object: str Object name for the FITS header

nExp: int Number of Exposures

ExpTime: float [seconds] Exposure Time

TriggerCaHK: bool Trigger the Ca H & K detector for this observation?

TriggerGreen: bool Trigger the Green detector for this observation?

TriggerRed: bool Trigger the Red detector for this observation?

IntensityMonitor: bool Run an Intensity Monitor measurement on this lamp before taking data?

CalND1: str Cal Bench filter 1 position. Throughput = 10^-OD. Values: OD 0.1, OD 1.0, OD 1.3, OD 2.0, OD 3.0, OD 4.0

CalND2: str Cal Bench filter 2 position. Throughput = 10^-OD. Values: OD 0.1, OD 0.3, OD 0.5, OD 0.8, OD 1.0, OD 4.0

OpenScienceShutter: bool Open the Source Select Shutter for the Science fiber?

OpenSkyShutter: bool Open the Source Select Shutter for the Sky fiber?

TakeSimulCal: bool Inject simultaneous calibration light on to the detector during exposure?

WideFlatPos: str If the WideFlat source is chosen, which wheel position to use?

ExpMeterMode: str Exposure meter mode? (monitor, control, off)

ExpMeterExpTime: float [seconds] Exposure Time for the exposure meter

ExpMeterBin: int Which wavelength bin to use for exposure meter termination? (1=498nm, 2=604nm, 3=711nm, 4=817nm)

ExpMeterThreshold: float [e-/nm] Threshold flux at the science detector at which to terminate the exposure